[ Up ]

H25C Industrial Halogen Leak Detector (Sorry, No Longer Available. Superseded by the H25-IR)

Features

• High sensitivity for both chlorine and fluorine based refrigerants
• Built-in R­134a Leak Standard with a 10 second automatic calibration for R­12 or R­134a
• Pass/Fail Test mode
• New mini-probe, easier access for confined applications (Optional)
• Readout in oz/yr., g/yr., or x10^-5 ml/second
• Long sensor life
• Switchable search mode with up to 10 times the sensitivity of the alarm set-point
• Excellent background rejection
• Analog output: 0-1 VDC (Optional)
• Relay alarm output (Optional)
• Hybrid display (Analog bargraph and digital)
• Operation status prompts (Air flow alarm, calibration request, etc.)

Specifications

• Measures: R­134a or R­12. In addition most ASHRAE listed refrigerants can be measured accurately utilizing manual calibration with the optional LS-20B Leak Standard containing the refrigerant of choice
• Measuring Range:
  • 0.05–5.0 oz/yr
  • 1.4–99 G/yr
  • 0.9 x 10^-5 to 90 x10^-5 St'd ML/sec
• Measured Gas Selection: Switch selectable, R­134a or R­12
• Display: Digital and analog, leak detection is also indicated by an LED on the probe and a proportional volume audio tone
• Response Time: Approx. 1 sec. with 6-foot probe
• Calibration: Automatic calibration for R­12 or R­134a using built-in leak standard or manual calibration using LS20B Leak Standard containing refrigerant desired
• Display Alarm: Reduced air flow; calibration failure
• Unit Selection: Switch selectable oz/yr, G/yr, or 10^-5 St'd ML/sec
• Sensor Type: Catiionic emission type sensor (heated diode)
• Power: 100/115 VAC, 110/220 VAC, or 120/240 VAC, 50/60 Hz, 100 VA
• Weight: 22 lbs
• Size: 6" x 11" x 18"

Additional Product Information

(489K) Data Sheet