AGM300-ADM800

Features & Benefits

• Select areas to be measured - point by point
• Eliminate false alarms with use of non-dispersive IR source and sample draw system
• Measures ammonia gas from 25 to 10,000 ppm with a sensitivity of 1 ppm
• Sample points locate up to 500 feet from unit
• Remotely interrogate, acknowledge alarms
• Quick field expansion from 4 to 16 sampling zones
• Bolt-in, bolt-out internal components so the unit never leaves the wall
• Full two-way communication via RS-458
• RS-232 port for local / modem communication
• Split-architecture design keeps your investment to a minimum
• Two-year warranty

Specifications

• Gas Monitored: Ammonia (NH₃ also known as R-717)
• Measuring Range: 25 to 10,000 ppm
• Inputs: 4 points standard, expandable to 16 points in 4 point increments
• Output Signal: 4-20 mA DC (optional)
• Detector Type: Non-dispersive infrared
• Sensitivity: 1 ppm
• Accuracy: ±10 ppm from 0 to 100 ppm, �10% of reading from 100 to 10,000 ppm
• Front Panel Display
  • Green LED indicates when unit is operating properly
  • Red LED indicates when any monitored point is above its alarm setting
  • Yellow LED indicates a clogged sample line or other system fault
• Response Time: 5 to 120 seconds, depending on tube length and gas concentration
• Monitoring Distance: Up to 500 feet from measuring point to monitor
• Power: 120/240 VAC, 50/60 Hz
• Size/Weight: 17" x 12" x 5.5" / 15 lbs (may be wall or rack mounted)

AGM300 Monitor Ordering Information

When ordering this product, you must specify 3 codes. These codes will build up a part number. Codes must be listed in the following sequence:

• Code A - Model Number
• Code B - Number of Zones
• Code C - AC Input Power

For example: To order a 4-zone, 120 VAC ammonia monitor, you would order a AGM300-11-1.

ADM800 Remote Display Ordering Information

Ordering Information